Bộ cung cấp nguồn ACDWX Series Impulse Tester／Impulse Winding Tester ECG-Kokusai – Máy kiểm tra xung cuộn dây
DWX-15 | DWX-15PD
| DWX-15 | DWX-15PD | ||
|---|---|---|---|
| Applied voltage/applied steps: *With 1 K Ω load |
1000 V – 15000 V (200 V steps) |
||
| Test impedance range | 50μH or higher | ||
| Sampling speed/memory | 8bit／10nano-sec.（100MHz） / 8192-Byte | ||
| Sampling ranges （WIDTH） | -4、-3、-2、-1、0、1、2、3、4、5 10 ranges (0 is compatible with the DW Series) |
||
| Test input circuit (Impedance) | Resistance division (5MΩ) | ||
| Screen display, waveform display range |
640 x 460 (VGA), 8.4-inch TFT color liquid crystal, 4-color display 512 x 256 |
||
| Judgment method | Comparison of master waveform with test waveform Judgment based on comparison of waveform area, waveform differential area and discharge quantity Winding insulation dielectric breakdown voltage test function | ||
| Master waveform memory capacity | Body expansion | 196 types (14 types/14 pages) 700 types with Compact Flash Memory (14 types/50 pages) |
|
| Microwave sensor antenna | None | Partial discharge electromagnetic sensing by narrow bandwidth flat batch antenna | |
| Detection range | None | It is recommended that a distance of 30 cm be allowed from the test piece to the antenna when the device is installed. | |
| Antenna dimensions/Length of cable between antenna and body | None | W = 80 mm, H = 80 MM, D = 10 mm, cable length = 2 m | |
| External interface | Parallel I/O (Start, reset, OK, NG, Busy, mater switching, etc.) RS-232C (Test control, test data, etc.) Printer board (Hard screen copies, etc.) Ethernet adapter (optional) |
||
| Accessories | 15-M test cable: 1, power supply cable (with 3P adapter) parallel I/O connector: 1 User’s manual, test result sheets: 1 set |
||
| Usage conditions | 0℃ – 40℃, power supply voltage: 100 V 240 V ± 10% (Shipping configuration setting) | ||
| External dimensions (Not including carrying handle) ・Weight |
W=364 x 517mm H=517mm |
||
